VoCore: Simple Start Tutorial 2

Prepare:
1. USB wire 
2. VoCore
IMG_0136

Step 1:
Cut the USB wire in the middle. We use red and black wires.
IMG_0137

Clean up the USB wire.(not necessary).Tape again. :)
IMG_0142

Step 2:
Connect VoCore to the wire, and connect USB to computer.
IMG_0165

Now it works, then you can find VoCore in your computer AP list.
Rest please read http://vonger.cn/?p=1536.

Note:
1. Some computers USB power supply is not stable, that might cause VoCore failed to reboot. MacBook, ThinkPad do not have such issue. From report, some Dell PC might have such issue.
2. Clean up is not necessary, but better to do if you want to use your USB wire in long term. :)

3 thoughts on “VoCore: Simple Start Tutorial 2”

  1. joyhope

    I do not think it is proper test. Standard USB HOST won’t output current >100mA if there is no proper device.

    I think this is the reason why some PCs USB does not work.

    1. vonger Post author

      That is not true, many device without driver might need high current output to init. It will not work on such “function” pc.

Comments are closed.