Now the tutorial continues, as I promised 🙂

1. use this firmware, download here: Test Firmware
(This firmware is just used to make sure your VoCore do not have other drivers stop you install the new one. It installed enough tools for this tutorial, so you do not have to find it online)

2. flash this firmware to your VoCore.

3. get two files here:package uncompress and upload them to VoCore /tmp/ folder.
“vocore_gdma.ko” is the driver.
“out” is the test data file, just a part of a wav file, 44100Hz, 16bits, stereo.

4. copy and run the following magic command.

i2cset -y 0 0x1a 0x1e 0x00
i2cset -y 0 0x1a 0x0e 0x02
i2cset -y 0 0x1a 0x08 0x05
i2cset -y 0 0x1a 0x68 0x07
i2cset -y 0 0x1a 0x6a 0x86
i2cset -y 0 0x1a 0x6c 0xc2
i2cset -y 0 0x1a 0x6e 0x26
i2cset -y 0 0x1a 0x32 0xc0
i2cset -y 0 0x1a 0x35 0xe1
i2cset -y 0 0x1a 0x5e 0x0c
i2cset -y 0 0x1a 0x45 0x00
i2cset -y 0 0x1a 0x4b 0x00
i2cset -y 0 0x1a 0x0a 0x00
i2cset -y 0 0x1a 0x05 0xff
i2cset -y 0 0x1a 0x07 0xff

4.1. insert driver to kernel.

insmod /tmp/vocore-gdma.ko

4.2. send data to audio buffer.

cat /tmp/out > /sys/devices/10000000.palmbus/10002800.gdma/data

5. now, everything is ready, final command to play “out”.

echo 1 > /sys/devices/10000000.palmbus/10002800.gdma/play

6. After 5, you can heard some “music” output from your headphone, just a 5.9 seconds dead loop. Call this command to stop it.

echo 0 > /sys/devices/10000000.palmbus/10002800.gdma/play

PS: the music slice is from alan, 悲しみは雪に眠る, a lovely music 🙂
PSS: the music is weird somewhere…I think I must make some mistake when setting up the wm8960…(i2cset command)

But anyway, there is some music output at last. 😀
Here is the driver source code:vocore-gdma.c

Here is app from Wutong, did not use DMA interrupts, so you can run it under user mode.
i2swrite.zip

[embedyt] http://www.youtube.com/watch?v=uWDr5UYh4o4[/embedyt]
PS: Sorry about first batch, the plastic dock is not matched very well, current batch fixed such problem. Please contact support@vocore.io to replace your plastic dock.
PSS: better to use 720p/15fps format or less for long time monitor usage(>= 30 minutes).

Firmware download here: Download

Source code for Linux here: uvc_3.10

Compile:
1. modify makefile

TARGET=sonix_uvcvideo
KDIR:=$YOUR_OPENWRT_PATH/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_rt305x/linux-3.10.49/
PWD:=$(shell pwd)

CCFLAGS += -I $(KDIR)/include/

$(TARGET)-objs  := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \
                  uvc_status.o uvc_isight.o uvc_debugfs.o nalu.o

obj-m:=$(TARGET).o

default:
        make $(CCFLAGS) -C $(KDIR) M=$(PWD) ARCH=mips CROSS_COMPILE=mipsel-openwrt-linux- modules
clean:
        rm -rf *.o *.ko *.mod.* modules.* Module.* .tmp_versions .*.*.cmd

2. make it to create sonix_uvcvideo.ko
3. run on VoCore

opkg install kmod-input-core kmod-video-uvc
insmod sonix_uvcvideo.ko

result:
/dev/video0 is mjpeg stream, /dev/video1 is h264 stream.
also you will find UAC, the 8K onboard microphone in /dev/ folder.

ls /dev/video*
v4l2-ctl --list-formats -d /dev/video0
v4l2-ctl --list-formats -d /dev/video1

opkg install v4l-utils

root@OpenWrt:~# v4l2-ctl --list-formats -d /dev/video0
ioctl: VIDIOC_ENUM_FMT
    Index       : 0
    Type        : Video Capture
    Pixel Format: 'MJPG' (compressed)
    Name        : MJPEG

    Index       : 1
    Type        : Video Capture
    Pixel Format: 'YUYV'
    Name        : YUV 4:2:2 (YUYV)
    
root@OpenWrt:~# v4l2-ctl --list-formats -d /dev/video1
ioctl: VIDIOC_ENUM_FMT
    Index       : 0
    Type        : Video Capture
    Pixel Format: 'H264' (compressed)
    Name        : H.264
    

Recently I get some complain about the broken VoCore + Dock during the shipping especially the package to US.
The post office said currently there are too many packages already exceeds their limit, so it is normal some packages are broken…:'(
All new packages will ship with a plastic case, to avoid recently “violence delivery”.
And if your dock is broken during the shipping, please email to support@vocore.io with picture, we will ship a new replacement.

This is the first version of the firmware
This firmware is only for dock2(with WM8960 chip at bottom)
Download at
http://vonger.cn/upload/firmware/vocore.dock2.bin

Compile by yourself:

1. clone openwrt 14.07 to your linux pc or vm.
git clone git://git.openwrt.org/14.07/openwrt.git

2. update VOCORE.dts, the following one is mine.

/dts-v1/;

/include/ "rt5350.dtsi"

/ {
	compatible = "VoCore", "ralink,rt5350-soc";
	model = "VoCore";

	palmbus@10000000 {
		gpio1: gpio@660 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "s25fl064k";
				reg = <0>;
				linux,modalias = "m25p80", "s25fl064k";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "uboot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "uboot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0xfb0000>;
				};
			};

			spidev@1 {
				compatible = "linux,spidev";
				spi-max-frequency = <10000000>;
				reg = <1>;
			};
		};

                gdma: gdma@2800 {
                        compatible = "ralink,rt2880-gdma";
                        reg = <0x2800 0x800>;

                        resets = <&rstctrl 14>;
                        reset-names = "dma";

                        interrupt-parent = <&intc>;
                        interrupts = <7>;

			#dma-cells = <1>;
			#dma-channels = <16>;
			#dma-requests = <8>;
                };

		i2s: i2s@a00 {
			compatible = "ralink,mt7620a-i2s";
			reg = <0xa00 0x100>;

			resets = <&rstctrl 17>;
			reset-names = "i2s";

			interrupt-parent = <&intc>;
			interrupts = <10>;

			dmas = <&gdma 2 &gdma 3>;
			dma-names = "tx", "rx";
		};
	};

	pinctrl {
		state_default: pinctrl0 {
			gpio {
				ralink,group = "jtag", "led";
				ralink,function = "gpio";
			};

			gpio_i2s {
				ralink,group = "uartf";
				ralink,function = "gpio i2s";
			};
		};
	};

	ethernet@10100000 {
		mtd-mac-address = <&factory 0x4>;
	};

	esw@10110000 {
		ralink,portmap = <0x17>;
	};

	wmac@10180000 {
		ralink,mtd-eeprom = <&factory 0>;
	};

	ehci@101c0000 {
		status = "okay";
	};

	ohci@101c1000 {
		status = "okay";
	};

	i2c-gpio {
		compatible = "i2c-gpio";
		gpios = <&gpio0 11 0 &gpio0 14 0>;
		i2c-gpio,delay-us = <2>; /* around 400KHz */

		#address-cells = <1>;
		#size-cells = <0>;

		wm8960: wm8960@1a {
			compatible = "wm8960";
			reg = <0x1a>;
		};
	};

	audio {
		compatible = "ralink,wm8960-audio";
		model = "wm8960-audio";
		
		cpu-dai = <&i2s>;
		codec-dai = <&wm8960>;
	};

	gpio-export {
		compatible = "gpio-export";
		#size-cells = <0>;

		gpio0 {
			gpio-export,name = "gpio0";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 0 0>;
		};

		gpio12 {
			/* UARTF_DCD_N */
			gpio-export,name = "gpio12";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 12 0>;
		};
		gpio13 {
			/* UARTF_DSR_N */
			gpio-export,name = "gpio13";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 13 0>;
		};

		/* JTAG */
		gpio17 {
			/* JTAG_TDO */
			gpio-export,name = "gpio17";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 17 0>;
		};
		gpio18 {
			/* JTAG_TDI */
			gpio-export,name = "gpio18";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 18 0>;
		};
		gpio19 {
			/* JTAG_TMS */
			gpio-export,name = "gpio19";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 19 0>;
		};
		gpio20 {
			/* JTAG_TCLK */
			gpio-export,name = "gpio20";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 20 0>;
		};
		gpio21 {
			/* JTAG_TRST_N */
			gpio-export,name = "gpio21";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio0 21 0>;
		};

		/* ETH LEDs */
		gpio23 {
			/* ETH1_LED */
			gpio-export,name = "gpio23";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio1 1 0>;
		};
		gpio24 {
			/* ETH2_LED */
			gpio-export,name = "gpio24";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio1 2 0>;
		};
		gpio25 {
			/* ETH3_LED */
			gpio-export,name = "gpio25";
			gpio-export,direction_may_change = <1>;
			gpios = <&gpio1 3 0>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		status {
			label = "vocore:green:status";
			gpios = <&gpio1 0 0>;
		};
		eth {
			label = "vocore:orange:eth";
			gpios = <&gpio1 4 0>;
		};
	};
};

3. Setup dma driver, add dma.mk to [openwrt]/package/kernel/linux/modules/

DMA_MENU:=DMA support


define KernelPackage/ralink-gdma
  TITLE:=Ralink GDMA driver
  SUBMENU:=$(DMA_MENU)
  KCONFIG:= \
        CONFIG_DMADEVICES=y \
	CONFIG_DMA_ENGINE=y \
        CONFIG_DMA_VIRTUAL_CHANNELS \
        CONFIG_DMA_RALINK 
  FILES:= \
        $(LINUX_DIR)/drivers/dma/virt-dma.ko \
        $(LINUX_DIR)/drivers/dma/ralink-gdma.ko
  AUTOLOAD:=$(call AutoLoad,11,ralink-gdma)
endef

define KernelPackage/ralink-gdma/description
 Kernel module for Ralink GDMA device support
endef

$(eval $(call KernelPackage,ralink-gdma))

4. Setup ALSA DMA
Whatever I do to the makefile/config, still two files can not be compiled, no idea what is wrong.
They are $LINUX/sound/soc/soc-dmaengine-pcm.c soc-generic-dmaengine-pcm.c
I have to force them to be compiled.

4.1. modify $LINUX/sound/Kconfig, comment that ifneq and endif.

#ifneq ($(CONFIG_SND_SOC_DMAENGINE_PCM),)
snd-soc-core-objs += soc-dmaengine-pcm.o
#endif

#ifneq ($(CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM),)
snd-soc-core-objs += soc-generic-dmaengine-pcm.o
#endif

4.2. modify $OPENWRT/target/linux/ramips/rt305x/config-3.10 to force it compiled.
add two line at end of it.

CONFIG_SND_SOC_DMAENGINE_PCM=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y

5. Setup ALSA WM8960/I2S driver.
modify $OPENWRT/target/linux/ramips/modules.mk
@TARGET_ramips_mt7620a to @TARGET_ramips, so it will show not only MT7620a kernel but also in RT5350.

define KernelPackage/sound-mt7620
  TITLE:=MT7620 PCM/I2S Alsa Driver
  DEPENDS:=@TARGET_ramips +kmod-sound-soc-core +kmod-regmap
  KCONFIG:= \
        CONFIG_SND_MT7620_SOC_I2S \
        CONFIG_SND_MT7620_SOC_WM8960
  FILES:= \
        $(LINUX_DIR)/sound/soc/ralink/snd-soc-mt7620-i2s.ko \
        $(LINUX_DIR)/sound/soc/ralink/snd-soc-mt7620-wm8960.ko \
        $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8960.ko
  AUTOLOAD:=$(call AutoLoad,90,snd-soc-wm8960 snd-soc-mt7620-i2s snd-soc-mt7620-wm8960)
  $(call AddDepends/sound)
endef

define KernelPackage/sound-mt7620/description
 Alsa modules for ralink i2s controller.
endef

$(eval $(call KernelPackage,sound-mt7620))

6. Now, everything is ready. make menuconfig
Select in Kernel modules:
add I2C support/kmod-i2c-gpio-custom;
del I2C support/kmod-i2c-ralink;
add DMA support/kmod-ralink-gdma
add Sound support/kmod-sound-mt7620

7. That’s all, make V=s, build the bin file.

Later I will do more test on this firmware, dma, i2c and i2s works well in this firmware.

Drivers works:

root@OpenWrt:/dev# ls
audio               i2c-0               mtd0ro              mtd3ro              mtdblock1           network_throughput  shm                 urandom
bus                 kmsg                mtd1                mtd4                mtdblock2           null                snd                 watchdog
console             log                 mtd1ro              mtd4ro              mtdblock3           ppp                 spidev32766.1       watchdog0
cpu_dma_latency     mem                 mtd2                mtd5                mtdblock4           ptmx                tty                 zero
dsp                 mixer               mtd2ro              mtd5ro              mtdblock5           pts                 ttyS0
full                mtd0                mtd3                mtdblock0           network_latency     random              ttyS1
root@OpenWrt:/dev# cd snd
root@OpenWrt:/dev/snd# ls
controlC0  pcmC0D0c   pcmC0D0p   timer

root@OpenWrt:/dev/snd# lsmod
arc4                    1312  2 
cfg80211              197639  2 rt2x00lib
compat                  2285  3 rt2800soc
crc_ccitt               1019  2 rt2800lib
crc_itu_t               1019  0 
crypto_blkcipher       10375  1 arc4
eeprom_93cx6            1807  0 
ehci_hcd               29964  1 ehci_platform
ehci_platform           2272  0 
gpio_button_hotplug     5984  0 
i2c_algo_bit            4538  1 i2c_gpio
i2c_core               15054  6 snd_soc_wm8960
i2c_dev                 4064  0 
i2c_gpio                2400  0 
input_core             24281  1 snd
ip6_tables              8993  3 ip6table_raw
ip6t_REJECT             2336  2 
ip6table_filter          608  1 
ip6table_mangle         1024  1 
ip6table_raw             576  1 
ip_tables               9165  4 iptable_nat
ipt_MASQUERADE          1136  1 
ipt_REJECT              1776  2 
iptable_filter           672  1 
iptable_mangle           928  1 
iptable_nat             1680  1 
iptable_raw              640  1 
ipv6                  238854 26 ip6t_REJECT
leds_gpio               2944  0 
lzo_compress            2082  1 regmap_core
lzo_decompress          1351  1 regmap_core
mac80211              344225  3 rt2800lib
nf_conntrack           44715 13 iptable_nat
nf_conntrack_ftp        5136  1 nf_nat_ftp
nf_conntrack_ipv4       4676  8 
nf_conntrack_ipv6       4976  3 
nf_conntrack_irc        2784  1 nf_nat_irc
nf_defrag_ipv4           758  1 nf_conntrack_ipv4
nf_defrag_ipv6          8695  1 nf_conntrack_ipv6
nf_nat                  9759  7 iptable_nat
nf_nat_ftp              1216  0 
nf_nat_ipv4             2526  1 iptable_nat
nf_nat_irc              1008  0 
nls_base                5006  1 usbcore
of_i2c                  1344  1 i2c_gpio
ohci_hcd               13360  0 
ppp_async               6176  0 
ppp_generic            19650  3 pppoe
pppoe                   7744  0 
pppox                   1338  1 pppoe
ralink_gdma             4032  2 
regmap_core            25039  4 snd_soc_wm8960
regmap_i2c               966  2 snd_soc_wm8960
regmap_spi              1078  1 snd_soc_core
rt2800lib              91441  2 rt2800soc
rt2800mmio              6338  1 rt2800soc
rt2800soc               2464  0 
rt2x00lib              34047  5 rt2800soc
rt2x00mmio              1952  2 rt2800soc
rt2x00soc               1218  1 rt2800soc
slhc                    4347  1 ppp_generic
snd                    39083 10 snd_soc_wm8960
snd_compress            6175  1 snd_soc_core
snd_hwdep               4302  0 
snd_mixer_oss          12393  1 snd_pcm_oss
snd_page_alloc          3249  1 snd_pcm
snd_pcm                56509  2 snd_soc_core
snd_pcm_oss            33553  0 
snd_rawmidi            14995  0 
snd_seq_device          4301  1 snd_rawmidi
snd_soc_core           91031  3 snd_soc_mt7620_wm8960
snd_soc_mt7620_i2s      2896  2 
snd_soc_mt7620_wm8960    2048  0 
snd_soc_wm8960         16944  1 
snd_timer              14382  1 snd_pcm
soundcore               3788  1 snd
usb_common              1160  1 usbcore
usbcore               106727  3 ohci_hcd
virt_dma                1333  1 ralink_gdma
x_tables               10997 26 ipt_MASQUERADE
xt_CT                   2272  0 
xt_LOG                  9552  0 
xt_REDIRECT             1056  0 
xt_TCPMSS               2704  2 
xt_comment               480 53 
xt_conntrack            2144 10 
xt_id                    480  0 
xt_limit                 992 20 
xt_mac                   608  0 
xt_mark                  672  0 
xt_multiport            1200  0 
xt_nat                  1072  0 
xt_state                 688  0 
xt_tcpudp               1712  8 
xt_time                 1664  0 

root@OpenWrt:/sys/class/dma# ls
dma0chan0   dma0chan1   dma0chan10  dma0chan11  dma0chan12  dma0chan13  dma0chan14  dma0chan15  dma0chan2   dma0chan3   dma0chan4   dma0chan5   dma0chan6   dma0chan7   dma0chan8   dma0chan9

root@OpenWrt:/proc# cat interrupts
           CPU0       
  5:        203      MIPS  10100000.ethernet
  6:     229856      MIPS  rt2800_wmac
  7:     353640      MIPS  timer
  9:          0      INTC  10000100.timer
 15:        121      INTC  10002800.gdma
 20:         30      INTC  serial
 25:          1      INTC  esw
 26:          1      INTC  ehci_hcd:usb1, ohci_hcd:usb2
ERR:          0

ralink-gdma.c might have a bug, once I remove the log output, it will not trigger 10002800.gdma interrupts, very weird.

Special thanks to Guangqian Luo. When I am debugging my linux audio driver, he notified me there already exists source code in linux kernel/ALSA and it really works. He is using the right way doing the work but I am not 😀 I am reinventing the wheel…ALSA exists code is much better than mine.

To make WM8960 work, we need five necessary parts:
1. I2C interface, used to transfer command to WM8960.
2. I2S interface, used to transfer data to WM8960.
3. WM8960 driver, used to call I2S, I2C driver.
4. ALSA middle layer driver, used to connect user and kernel.
5. DMA interface, used to smooth data transfer between software and hardware.

1. I2C part, that is easy, we use i2c-gpio, based on gpio 11,14.
add these lines to VOCORE.dts, root part.

        i2c-gpio {
                compatible = "i2c-gpio";
                gpios = <&gpio0 11 0 &gpio0 14 0>;
                i2c-gpio,delay-us = <2>; /* around 400KHz */

                #address-cells = <1>;
                #size-cells = <0>;

                wm8960: wm8960@1a {
                        compatible = "wm8960";
                        reg = <0x1a>;
                };
        };

2. I2S interface, source code already there, in [kernel]/sound/soc/ralink/mt7620-i2s.c
This is for MT7620, but I checked datasheet, the register of MT7620 and RT5350 are 99% same, only one bit is not same but nothing matter.

3. WM8960 driver.
[kernel]/sound/soc/codecs/wm8960.c

4. ALSA driver.
[kernel]/sound/soc/ralink/mt7620-wm8960.c

5. DMA driver.
[kernel]/drivers/dma/ralink-gdma.c

Haha, the codes are clean and stable(OpenWRT 14.07, Linux 3.10.49), looks like my code is useless now, maybe later it can be used to help starter learn kernel driver.

I will base on the exists source make a new firmware soon.

VoCore + Dock has updated, now audio codec is on it, new buyers’ docks(>= Oct.14) are updated to the new one already.
New docks are able to play music, also record sound remotely by its on board microphone.

New features for hardware and software:
1. audio codec WM8960G for record and playback(I2S interface to VoCore).
2. microphone, headphone slot.
3. on board 4mm microphone.
4. lower its power consume from 1.0watt to 0.5watt.
5. fix ap+sta mode.(using helper program: vocoremon, stable version)

Hope you enjoy the new features and have new adventure. 🙂
New dock firmware download here: http://vonger.cn/upload/firmware/vocore.dock2.bin

PS:
1. New docks are very hard to production even in the most experience factory…the process is slow, have to add two weeks lead time(maybe more).
2. This time, we will make some separated docks, so old VoCore+Docks are also able to update. It will be shown in store once we have enough in stock. Discount $5 for old dock owners and also free shipping.
3. Driver is still under develop(planed to be released this week, but have to deal the production first :'( ), once it is done, will commit to openwrt.org, also release firmware on the blog/forum/facebook, sorry for the delay.

After 12 failed versions, finally I made it.

Pure Video Quality: every detail, just that clean.
Low Power Consumption: h264 mode <= 0.75w(1080p/25fps); MJPG <= 0.7w Small size: 20mm only.
High Compress: 1080p/25fps, 300~600KB/s
Embed Microphone: 8KHz, sound record.
USB 2.0 Interface: directly connect to VoCore or PC, no driver requested(mjpeg).
Lens: 2.8mm 130°

Stable Temperature: -10~35℃ （1080p/15fps, 0.75watt)
Max Operation Temperature: 45℃
Max: 1080p, 30fps(this is not good for CMOS, might cause permanently damage)
WARNING: over 45℃ might cause permanently damage to CMOS, suggest use it in room under 35C(heat sink is necessary).

I spend over 1000 hours on this little thing, once I even think it is impossible: I can not avoid noise from DCDC effects the video quality; I can not lower the power consumption; I can not reduce the heat; I can not… but everything has passed, THERE IT IS.

This is a real challenge. 😀 What next?

PS: we did not compose the heat sink and lens.

Recently I am trying to fix a issue that most people had already known it: if you setting up VoCore into AP+STA mode to connect to your home router(or any router else), once your changed your home router password or you bring VoCore to another place that it can not find your home router AP signal ,VoCore will failed to create its “VoCore-XXXXXX” AP hot point.
(Is Chinglish the most popular language on internet? 😀 Hope you can understand what I am saying upper)
The problem is you will not able to connect to VoCore through wireless if you bring your VoCore-in-AP+STA-mode to another place.

Last time I introduce a script writing by LiZhuohuan, but it has some limit, it is not clever enough, it only change your VoCore from AP+STA to AP when it detect VoCore can not connect to your home router, but once your VoCore back to your home, it can not recover it, you have to set AP+STA back manually, and the script keep running every 10~30 seconds, that takes power. So I write this little tool do all magically.

Install:
Copy vocoremon to /bin/vocoremon
Add one line into /etc/rc.local:
/bin/vocoremon 20 >> /tmp/vocore.log &
That’s ALL.

Every time VoCore boot up, it will run vocoremon, if AP+STA is normal, quit itself, else vocoremon makes VoCore run in AP mode. When next time boot, vocoremon find your STA back to normal, it will quit AP mode and make VoCore run back into AP+STA mode.
So once you install vocoremon, do not have to take USB2TTL anymore, VoCore are able to create its AP hot point anywhere, any setting.

I tested it, works normal in my home, but I know the situation is complex, it has a low chance not working, I open the source code into https://github.com/Vonger/vocoremon.git, hope everybody could update it make it better.

The bin file can be download here. http://vonger.cn/upload/tools/vocoremon

Just want to know, in standby mode, how much power will VoCore consume.
It is very interesting, if we shutdown ethernet, VoCore current consume will low to 0.1A(0.5watt), if we shut down wifi, how much power will it consume?

First, call script http://vonger.cn/?p=1880, shutdown the ethernet.
Then, power off wifi.(add “option disabled 1” to /etc/config/wireless)

The result of RT5350 is really out of my imagination.

Here is the picture and the truth:

1h20m, but only 80mAh!(Three hours is around 200mAh)

That means it consumes ONLY 70mAh every hour, a small Li-battery(2000mAh) will able to make it work over a day!

VoCore is not sleeping, we can enable the wifi or ethernet anytime in 3 seconds through UART.

Same test for VoCore2: standby power consume is around 63mAh…Emm, this result is not much better, but fair, 580MHz vs 360MHz. Looks like it is the chip limit.