VoCore: Ethernet Test

Connect dock to ethernet.

IMG_20140527_111233
IMG_20140527_111307

Looks like there is nothing wrong in hardware part.
LuCI detected the ethernet port0.

vocore.pluged

There is something wrong in the software part, I can not connect to the ip which alloced by my house router. VoCore’s AP+STA is still working, but ethernet not. I find the VoCore sta mac and the ethernet mac in my HyFi router DHCP client list.
192.168.1.103 is wwan(sta mode).
192.168.1.102 is the ethernet.
vocore.dhcp

This is ifconfig result.

root@OpenWrt:~# ifconfig
br-lan    Link encap:Ethernet  HWaddr 02:0C:43:30:50:C8
          inet addr:192.168.61.1  Bcast:192.168.61.255  Mask:255.255.255.0
          inet6 addr: fd50:771b:79c7::1/60 Scope:Global
          inet6 addr: fe80::c:43ff:fe30:50c8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1401 errors:0 dropped:0 overruns:0 frame:0
          TX packets:589 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:119829 (117.0 KiB)  TX bytes:117226 (114.4 KiB)

eth0      Link encap:Ethernet  HWaddr 02:0C:43:30:50:C8
          inet6 addr: fe80::c:43ff:fe30:50c8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4711 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5456 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2652097 (2.5 MiB)  TX bytes:839633 (819.9 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 02:0C:43:30:50:C8
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4708 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4998 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2567133 (2.4 MiB)  TX bytes:622033 (607.4 KiB)

eth0.2    Link encap:Ethernet  HWaddr 02:0C:43:30:50:C8
          inet6 addr: fe80::c:43ff:fe30:50c8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:453 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:176542 (172.4 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:163 errors:0 dropped:0 overruns:0 frame:0
          TX packets:163 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:13566 (13.2 KiB)  TX bytes:13566 (13.2 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:0C:43:30:50:C8
          inet addr:192.168.1.103  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:43ff:fe30:50c8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1948 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1338 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:279153 (272.6 KiB)  TX bytes:332484 (324.6 KiB)

wlan0-1   Link encap:Ethernet  HWaddr 00:0C:43:30:50:C9
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5483 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5848 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:665360 (649.7 KiB)  TX bytes:2902243 (2.7 MiB)

Looks like eth0 is following br-lan 192.168.61.1(same mac), so eth0 can not assigned to 192.168.1.102 auto. The two routers are fighting 😀
If I force eth0 ip to 192.168.1.102, what will happen? I will check later.

For now, the main hardware functions: Ethernet/Wifi/USB/GPIO, have passed two.

3 thoughts on “VoCore: Ethernet Test”

  1. abcsys

    Every “Coin” has two sides. One side WAN and other side LAN. Firewall between them. If you want to connect STA(wlan0-1) + eth0 to WAN side , then look OpenWrt DUAL WAN settings. Otherwise you can connect eth0 to LAN side and start DHCP server to eth0.

    1. vonger Post author

      Thank you for this information. I will try it once the hardware function test done. 😀

  2. seapharm

    >>JTAG, it might be possible but I did not test.

    Can you take time to test the function of Jtag, I am interested in it, Thanks!

Comments are closed.