Patch LuCI for VoCore2

Firmware link: http://vonger.cn/misc/vocore2/20180723V.bin

1. Click on “Scan”, it will show nearby access point, this mode is STA only, better to setting up in Point 2 to enable AP + STA.

2. Click Point 2, go to wireless setting.

In “General Setup” page, input your AP SSID.

Then in “Wireless Security”, setup your password, currently only WPA2 supported.

3. After that, click “Save & Apply”, then enable STA mode, wait around 10 seconds, setting up completed, now your VoCore can access internet.